Ionex

The name IONEX stands for ION-EXchanger, which is the very heart of this modern waste water treatment system. The Ionex is a modern and compact plant to treat rinsing water coming form the etching or through-hole-plating machines of a pcb laboratory. We offer 4 basic variants, which differ in rinsing water through-put and ion capacity. Type A and B are equipped with a cotton pre-filter, two cation columns and a ph neutralization column. Type KA and KB have three ion exchange columns.

The cation columns color red, when loaded with ferric ions and blue/green, when loaded with copper ions. Loading of anion column can be testet by measuring the conductance of the cleaned water.

Loaded columns can be sent to Bungard for regeneration or we support you to do the regeneration yourself. The drain water quality from this system is in accordance to German directives, which are of the highest standards world wide!

The New IONEX-Film in DVD-Quality (175 MB)

Features:

• For posttreatment of etching and galvanic rinsing water
• Removal of solids and all heavy metals
• closed water cycle possible (K-versions)
• Decrease of chemical oxygen demand
• Integrated storage sump with 110l (A/KA) or 220 l (B/KB) for collecting rinsing water
• Strong built-in hose pump
• Integrated cotton filter candle 10 µm (active carbon filter with K-versions)
• Significant change of color when loaded with metals
• Lower and upper sump level control switch
• Easy handling and operation
• Regeneration of ion exchange resins by supplier or by user at little cost
• IONEX A and B perform additionally PH neutralization and discharge to the drain

Technical Data:

	IONEX A (KA)	IONEX B (KB)
Dimensions (L x W x H):	425x 600x 1400mm	850x 600x 1400mm
Weight:	30 kg	60 kg
Tank capacity:	max. 110 l	max. 220 l
Cleaining capacity:	10 l/h	15 l/h
Electrical connection:	230 V~, 50 Hz, 50 W	230 V~, 50 Hz, 100 W
Special versions on request – technical alterations without notice.

As an option the IONEX can be equipped with a conductance meter (IONEX KA/KB) or a ph-meter (IONEX A/B). This way you have the quality of the treated rinse water always under control.On the right you can see the schematic and the connection of a IONEX Type A or B.
Closed loop rinsing water: IONEX KA and KB filter next to the metalic cations also the anionic halogens from the rinsing water, so you receive demineralized water. The demineralized water is collected and pumped back to the etching orthrough-hole-plating machine.
On the right you can see the schematic and the connection of a IONEX Type KA or KB.
Of course the machines of the IONEX family can be adapted according to your needs. The IONEX XXL e.g. cleans 1500 l of rinsing water. The IONEX AU filters gold ions out of rinsing water from a nickel-gold-processing machine.These gold ions can be regenerated and returned to the gold bath.
NEW LABION 2 Ion exchanger for fresh water cleaning. After treating your fresh water with LABION 2 you will receive demineralized water, which is necessary e.g. for through-hole-plating machines. Full system incl. µSiemens conductivity measurement and readout via diodes: 0,1 µSiemens – 1. green diode 5 µSiemens – 2. green diode 20 µSiemens – 1. red diode 50 µSiemens – 2. red diode dimensions: 115 x 115 x 515 mm capacity per hour: +- capacity per filter candle: 5°dG= 810 liter / 10° dH = 405 liter Electrical Connection: 110-220V AC We supply replacement filter candles.