CCD/2/ATC
|
|
The Bungard CCD/2/ATC is a high quality Computer Controlled Drilling machine with automatic tool change. The CCD/2/ATC differs from the CCD/ATC by a half sized working area (325 x 210mm).
The CCD/2/ATC is ideal for users, who do not have enough space to run an ATC machine.
Technical Data:
| Power supply: | 110-240 V, 50-60 Hz + vacuum cleaner (1500W) |
| Range of RPM: | 30.000 – 63.000 |
| Traveling speed: | 1 – 9000 mm/min |
| Software resolution: | 0,0001mm (0,1µm) |
| Mechanical resolution: | step resolution: Software selectable: 1 mil, ½ mil, ¼ mil (= 6.35 Mikrometer) |
| Tool diameter: | 0.1mm – 3,175mm (recommended, bigger tool diameter possible) |
| Position accuracy: | 20 ppm (0.002%) over the entire work space: |
| Maximum position speed per axis: | 9000/mm/min (=150 mm/s) |
| Maximum working speed per axis: | 9000/mm/min (=150 mm/s), individual setting on a per-tool basis, independent from position speed |
| Drill speed: | 5/s (= 18.000 holes/h= 300 holes/min) |
| Required Accessories: | Computer |
| Board fixation: | span fixing, clamp fixing, reference pin system, stack processing possible Option: vacuum fixation |
| CCD/2/ATC | |
| Weight kg | 30 |
| Dimension mm | 700x550x300 |
| Work area mm | 270x325x38 |
| Tool change | 16 |