The FP-21T Precision
The FP-21T Precision
This very sturdy system has achieved the 50µm line and space for milling processing.
In order to process with the fine and fragile tools, we elaborated the Z axis control. This enabled us to accomplish the 50 µm line and space for the first time in the world as the desktop PCB prototyping machine. Compared with the laser machine, FP-21T Precision is superior in cost performance.
Non-Contact Milling Head
As the board is pressured by air pressure, it leaves no undesirable traces on the board surface. Suitable for milling the soft substrate board such as teflon circuit board.
Manual Tool Change
Tool change can be done without any complicated action such as thread fastening.
Standard camera monitoring system.
You can easily adjust the right position while viewing display. Camera is also used for making double sided boards. The MITS Software has a built in function for aligning the bottom side of the board with high precision.
(Maximum useful magnification depends on the size of the screen).
The FP-21T Precision Specifications
|Minimum milling width (mm)||0.05 (50 µm) (2 mil)
|Minimum pattern width (mm)||0.05 (50 µm) (2 mil)|
|Working area (X/Y/Z) (mm)||150 x 150 x 25*8 (6" x 6" x 1")|
|Table size (X/Y) (mm)||240 x 380 (9" x 15")|
|Control axis||X, Y, Z|
|Control motor||5 Phase Stepper Motor|
|Resolution (µm) *3||1 (0.04 mil)|
|Maximum Travel Speed (mm/sec.) *1||60 (2.4")|
|Spindle speed min-1 (rpm) Spindle motor||5,000 - 40,000 Dynamic runout: less than 10µm DC Spindle|
|Drilling (mm)||0.05 - 3.175 (2 - 125 mil)|
|Maximum drilling cycle (cycles/min.) *2||80|
|Maximum drilling stroke (mm)||30 (1.18″)|
|Tool change||Manual / Single step tool change|
|Milling method (Absolute)||Manual switching|
|Milling method (Incremental)||Yes|
|Compressed air (Mpa)||0.5|
|Power consumption||100 / 240 V, 50-60 Hz, 250 VA|
|Machine dimensions W x D x H (mm)||Machine: 415 x 500 x 375 (16" x 20" x 15"
Controller: 125 x 235 x 305 (5" x 9" x 12")
|Machine weight (kg)||Machine: 36 (80 lbs) Controller: 4 (9 lbs)|
|Interface||One USB or RS-232C port
(Additional USB required with optional fiducial camera)
|Standard equipment||Dust proof, Acoustic cabinet Vacuum table (VTP-CRM) Tool protrusion equipment Ring-setter / Precision ring-setter (manual)
Connecting Cable (USB)
Software: Correct DXF
|Options and accessories||Cabinet (requires assembly) Vacuum table Ring-setter / Precision ring-setter (manual)
|Starter kit (Sold Separately)||Connecting Cable (RS232C)
Magnifying glass 10x
Extension hose for Vacuum cleaner
Substrate surface detecting function
Tools: High-frequency milling bit - End mills - Drill bit - Router bit