MITS wide-range PCB prototyping machine
MITS produce large table auto tool change models with the table sizes shown below for those customers who desire to process large size PCB.
Model 1) 425 mm (X) x 425 mm (Y)
Model 2) 325 mm (X) x 600 mm (Y)
Model 3) 425 mm (X) x 1200 mm (Y)
These three models are especially suited for fabrication of Antenna and RF circuit boards.
Special considerations that MITS paid in designing and building of these PCB prototyping machines for RF circuit board.
To ensure desired RF characteristics, it is especially important for RF circuit boards to have sharp edged patterns. We, thus, have been focusing our effort in achieving the highest levels of accuracy and rigidity embedded in the design and construction of our prototyping systems.
The larger the work area, the larger the torsion and deflection of the axes, and the larger the warp of the table. They naturally affect the cutting accuracy adversely.
To make a large table machine, you cannot just simply use longer axes. In order to assure highest level of cutting accuracy, you need to have built in rigidity in design. Our long table machines are designed and built to ensure highest level of rigidity for precision cutting, while enabling wider work areas.
Although we do not widely advertise these machines in our brochures, these machines earned great reputations among antenna manufacturers and other uses with special interest.
Software Improvement
In addition, MITS has developed a new function for our software which enables to process even larger boards. With this new function, you can cut a certain area of a large board first, then slide the board on the table to cut remaining area. With the help of optional camera system, you can accurately adjust the position the board.
It enables you to cut boards longer (in Y direction) than the size of work table. Please note that the dimension of X direction is limited by the size of the work table of each model. This function is applicable not only for above mentioned large table machines, but also for other machines shown below with an optional camera system.
Model Name | Working area (X/Y) | Working area with the new function (X/Y) |
Eleven Lab | 229 x 320mm | 229 x 2000mm |
FP-21T | 350 x 250mm | 350 x 2000mm |