Design Viewadmin2020-03-27T00:08:22+00:00
Design View
Software that displays images with the camera.
Operational Environments
OS |
Windows XP (SP2) / Vista / 7 / 8
*Applicable only to the XP 32 bit |
Pursuit of usability with camera
There are many useful ways to use the camera!
Check the result with the data pattern on the monitor
|
|
With our new “Overlay Function“, no extra work is needed to
check the result with magnifier (loupe); it will overlay the
resulted milling path and data pattern on monitor, easy to use
and very helpful function for making RF boards.
Pic. : Overlaid image of pattern and the board
|
Measures the distance from fiducial point accurately
|
|
Adjusting and aligning position is not a problem using the
camera for processing double-sided boards or additional
process on a completed board. Having the camera image
displayed on the monitor, it gives the user an easier time and
confidence that it’s in a correct position.
Pic. : Image of alignment to fabricate double-sided board
|
Fabricate boards larger than the working area
(Note: Manual Tool Change machine only)
|
|
In the past, the working area was limited just its working area
for any prototyping machine. Having the camera, it opened up
opportunity to process 2,000mm boards with our “segmented
fabrication“.
|
|
Milling the front side of large PCB
|
Slide the board, milling the back side of
large PCB
|
It will fabricate part of the data, then slide the board and use
the camera to align and adjust for further fabrication. |