Equipped Auto-Tool-Change and providing the superior cost performance

Auto Lab replaces Eleven Auto.

This model employs Auto-Tool-Change mechanism and achieves a low price, while its specification exceeds Eleven Auto.

Up to 10 tools are available for automatic tool change.

The standard spindle motor is made in Japan with high quality and less run-out. Tool change employs the electrical function without using the air compressor.  (Note: Spindle motor installed on Auto Lab 100 is not made in Japan. Air compressor required.)

Cabinet (requires assembly) is available as an optional item

Well designed and easy to perform maintenance.

Standard camera monitoring system  

Magnify the surface of the board and display on a monitor. You can easily adjust the right position while viewing display.  (Maximum useful magnification depends on the size of the screen)

Web Video  

[hdplay videoid=4 height=300 width=600 playlist=false autoplay=true]

Demonstration video featuring our latest Lab series auto tool change prototyping machine. It includes double-sided board fabrication, camera alignment function and overlay function. 

Optional equipment makes it even easier to process  Vacuum table  The vacuum table option employs the porous resin which holds tightly in the whole area  of the surface.  This stabilizes the substrate tightly without causing twisting or warping.


ModelAuto Lab
Minimum pattern width (mm)0.1 (4 mil)
Minimum milling width (mm)0.1 (4 mil)
Working area (X/Y/Z) (mm)229 x 300 x 45 *7 (9.0″ x 11.8″ x 1.8″)
Table size (X/Y) (mm)296 x 370 (11.6″ x 14.5″)
Control axisX, Y, Z
Control motorStepper Motor
Resolution (µm) *30.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) *155 (2.17″)
Spindle speed min-1 (rpm) Spindle motor5,000 – 62,000 DC Brushless Spindle
Drilling (mm)0.2 – 3.175 (8 – 125 mil)
Maximum drilling cycle (cycles/min.) *255
Maximum thickness of processed material (mm)*430 (1.18″)
Tool changeAutomatic / 10
Milling method (Absolute)No
Milling method (Incremental)Yes
Compressed air (Mpa) _
Power consumption100 – 240 V, 50-60 Hz, 150VA
Machine dimensions W x D x H (mm)435 x 575 x 430 (17.2″ x 23″ x 17″) With cabinet: 500 x 580 x 450 (19.7″ x 23″ x 18″)
Machine weight (kg)Approx. 34 (76 lbs) With cabinet: Approx. 44 (99 lbs)
Interface One USB or one RS-232C port
Standard equipment Fiducial positioning camera 30x (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
Options and accessoriesCabinet (requires assembly) Vacuum table Ring-setter / Precision ring-setter (manual)
Drilling ring
Microscope 100x
Vacuum cleaner
Starter kit (Sold Separately)Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extension hose for Vacuum cleaner
Tools: End mills - Drill bits - Router bits
Scoring Pad