Compacta 40 ABC 2 Cu – Through-hole plating line
|
Professsional equipment for laboratory prototyping of through-hole plated PCBs. Due to a second galvanic tank and increased tank dimensions, the Compacta 40 can plate 2 separate PCBs of max. 300 x 400 mm size at the same time! Smaller and bigger units are available. Compacta is manufactured according to your requirements. Clean system including built-in rinsing compartment. This particular machine type COMPACTA 40 ABC 2xCu was optimized to suit the ABC chemistry which is also supplied by Bungard.
Features
Example processing sequence:
- Cleaner
- Pre-catalyst
- Catalyst
- Salt remover
- Copper plating
Equipment:
- 5 treatment tanks
- 2 copper platingbath
- 1 triple-cascade rinse with flow control
- 1 spray rinse tank with magnetic valve, foot switch and flow control
Rectifier:
- 2 Rectifier , 6 V / 80 A each, seperate current and voltage display and setting. Residual ripple < 0.1 % DC
Bath control:
- 2 PTFE/PFA coated heaters, controlled by analogue instruments
- 6 full digital timers
- Air injection into the copper plating bath
- Board movement by DC gear motor, adjustable speed
Accessories/Options
- Digital timers for each bath (included in delivery!)
- Required accessories (not included in delivery!): Chemicals, anodes, anodes holder and board holder
Technical Data
tank dimensions | treatment tanks | galvanic tanks |
Length: | 500 mm | 500 mm |
Width: | 100 mm | 300 mm |
Depth: | 450 mm | 450 mm |
Capacity: | 20 l | approx. 60 l |
Total size (WxDxH): | 120 cm x 118 cm x 139 cm | |
Working level: | 95 cm | |
Weight: | approx. 130 kg | |
Heater: | 2 x 800 W | |
Rectifier: | 2 x 6 V, 80 A | |
Power supply: | 240 V, 50 Hz, approx. 2.5 kW | |
Additional Links:
Compacta 30
Favorit
Compacta Ni-Au
chemical Nickel-Gold
Protec
Ormecon chemical Tin
Accessories