The Auto Lab W

autolab_w_2011a

The Auto Lab W

Auto Lab W tool automatically changes up to 10 tool bits (20 tool bits optional) and it installs the spindle motor made in Japan, finely tuned and prevent run-out to the minimum. Tool change employs the electrical function without using the air compressor. A very sturdy system.

Hover Here For More Info

Optional equipments make it even easier to process

This stabilizes the substrate tightly without causing twisting or warpage.

The vacuum table option employs the porous resin which holds tightly in the whole area of the surface.

vc_ceramic_s

Automatic Tool Change

Tool change can be done automatically using up to 10 tools. (20 tool bits optional)

Tool change can be done without any complicated action such as thread fastening.

Standard camera monitoring system.

Magnify the surface of the board and display on a monitor.

You can easily adjust the right position while viewing display. Camera is also used for making double sided boards. The MITS Software has a built in function for aligning the bottom side of the board with high precision.

(Maximum useful magnification depends on the size of the screen).

Camera

Web Video

Auto Lab W Demo : Demonstration video featuring our latest Auto Lab series automatic tool change prototyping machine.

The Auto Lab W Specifications

ModelAuto Lab W
Minimum pattern width (mm)0.1 (4 mil)
Minimum milling width (mm)0.1 (4 mil)
Working area (X/Y/Z) (mm)400 x 365 x 45*6 (15.7″ x 14.3″ x 1.8″)
Table size (X/Y) (mm)490 x 490 (19.3″ x 19.3)
Control axisX, Y, Z
Control motorStepper Motor
Resolution (µm) *30.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) *180 (3.15″)
Spindle speed min-1 (rpm) Spindle motor5,000 – 62,000 (model 60)
5,000 – 100,000 (model 100)
DC Brushless Spindle
Drilling (mm)0.2 – 3.175 (8 – 125 mil)
Maximum drilling cycle (cycles/min.) *255
Maximum thickness of processed material (mm)*430 (1.18″)
Tool changeAutomatic / 10 (20 tools by option)
Milling method (Absolute)No
Milling method (Incremental)Yes
Compressed air (Mpa) _
Power consumption100 – 240 V, 50-60 Hz, 150VA
Machine dimensions W x D x H (mm)635 x 643 x 430 (25″ x 25.3″ x 17″)
Machine weight (kg)Approx. 41 (90 lbs)
Interface One USB or one RS-232C port
Standard equipment Fiducial positioning camera 30x (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
Options and accessoriesTool Change 20 Ring-setter / Precision ring-setter (manual)
Drilling ring
Microscope 100x
Software:
Vacuum cleaner
Starter kit (Sold Separately)Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extension hose for Vacuum cleaner
Tools: End mills - Drill bits - Router bits
Tape
Lubricant
Scoring Pad

Join The Most Satisfied MITS Users!

I’M SOLD, BUY NOW!