How to choose the vacuum table?
It depends on the thickness of the substrate board. When the substrate is more than 200µm, we recommend plastic resin type, When it is as thin as 50µm, we recommend ceramic type.
It depends on the thickness of the substrate board. When the substrate is more than 200µm, we recommend plastic resin type, When it is as thin as 50µm, we recommend ceramic type.
For 90 degree end mills, we recommend to change the tool when milled 25m long. For 0.8mm drilling bit, we recommend to change the tools when drilled 2000 holes.
A. Auto tool change models can do it automatically.
We supply many kinds of through hole formation system. (such as through hole pin, conductive paste)
An optional aluminum engraving bit makes it possible to mill on aluminun.
Both routing and drilling are possible.
When using the FP-21T Precision and vacuum table, it is 0.05mm (50µm). Other models without using the vacuum table, it is 0.2mm.
Fixing by Scotch tape is sufficient. Additionally, we supply two kinds of vacuum table.
FR-4 board, Paper phenol, Teflon, Strontium titanate, alminium, and acril material
The milling speed or spindle rotation speeds can configure easily. Additionally, the rough indication is written in the users' manual.