The Auto Lab 100

autolab_100_2011

The Auto Lab 100

This very sturdy model employs Auto-Tool-Change mechanism and achieves a low price, while its specification exceeds Eleven Auto. Up to 10 tools are available for automatic tool change. The standard spindle motor is made in Japan with high quality and less runout. Tool change employs the electrical function without using the air compressor. (Note: Spindle motor installed on Auto Lab 100 is not made in Japan. Air compressor required.)

Hover Here For More Info

Optional equipments make it even easier to process

This stabilizes the substrate tightly without causing twisting or warpage.

The vacuum table option employs the porous resin which holds tightly in the whole area of the surface.

vc_ceramic_s

Automatic Tool Change

Tool change can be done automatically using up to 10 tools.

Tool change can be done without any complicated action such as thread fastening.

Standard camera monitoring system.

Magnify the surface of the board and display on a monitor.

You can easily adjust the right position while viewing display. Camera is also used for making double sided boards. The MITS Software has a built in function for aligning the bottom side of the board with high precision.

(Maximum useful magnification depends on the size of the screen).

Camera

Web Video

Auto Lab Demo : Demonstration video featuring our latest Auto Lab series automatic tool change prototyping machine.

The Auto Lab Specifications

ModelAutoLab 100
Minimum pattern width (mm)0.1 (4 mil)
Minimum milling width (mm)0.1 (4 mil)
Working area (X/Y/Z) (mm)229 x 300 x 45 *6 (9.0″ x 11.8″ x 1.8″)
Table size (X/Y) (mm)296 x 370 (11.6″ x 14.5″)
Control axisX, Y, Z
Control motorStepper Motor
Resolution (µm) *30.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) *155 (2.17″)
Spindle speed min-1 (rpm) Spindle motor5,000 – 100,000 HF Spindle
Drilling (mm)0.2 – 3.175 (8 – 125 mil)
Maximum drilling cycle (cycles/min.) *255
Maximum thickness of processed material (mm)*410 (0.4″)
Tool changeAutomatic / 10
Milling method (Absolute)No
Milling method (Incremental)Yes
Compressed air (Mpa) 0.6
Power consumption100 – 240 V, 50-60 Hz, 200VA
Machine dimensions W x D x H (mm)435 x 575 x 430 (17.2″ x 23″ x 17″)
With cabinet: 500 x 580 x 450 (19.7″ x 23″ x 18″)
Machine weight (kg)Approx. 34 (76 lbs) With cabinet: Approx. 44 (99 lbs)
Interface One USB or one RS-232C port
Standard equipment Fiducial positioning camera 30x (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
Options and accessoriesCabinet (requires assembly) Vacuum table Ring-setter / Precision ring-setter (manual)
Drilling ring
Microscope 100x
Software:
Vacuum cleaner
Starter kit (Sold Separately)Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extension hose for Vacuum cleaner
Tools: End mills - Drill bits - Router bits
Tape
Lubricant
Scoring Pad

Join The Most Satisfied MITS Users!

I’M SOLD, BUY NOW!