FAQ’s

//FAQ’s
­

Currently, we have many distributor in USA, Asia, and Europe.

We will be creating a larger network in near future.

Our system is compliant from 85 to 264V.

It depends on the destination, but essentially the shipping cost is included in the price of the system.

In case of the oversea, we export F.O.B. Japan.

MITS repairs in our factory, but in overseas our distributors are in charge of repairing. For small issues, we support our customers by telephone or email.

We provide an annual maintenance contract. Please contact us for more detail.

Lubricate the lead screw, or cleaning of the spindle motor and inside of the collet.

There is only node lock licenses. (since Dec 2007)

Those who have experience of using CAD, they are able to master it in about one hour training.

Those who have no experience of using CAD, they can master our software from 3 to 4 hours training.

We supply the dust-proof/acoustic cabinets for each model.

This option is used for positioning of the substrate board. Additionally it is useful in additional milling and in positioning the double side milling.

We recommend our customer to use the 60 times magnification when magnifying 50µm track with the FP-21T Precision.

It depends on the thickness of the substrate board. When the substrate is more than 200µm, we recommend plastic resin type, When it is as thin as 50µm, we recommend ceramic type.

For 90 degree end mills, we recommend to change the tool when milled 25m long.

For 0.8mm drilling bit, we recommend to change the tools when drilled 2000 holes.

A.  Auto tool change models can do it automatically.

We supply many kinds of through hole formation system.

(such as through hole pin, conductive paste)

An optional aluminum engraving bit makes it possible to mill on aluminun.

Both routing and drilling are possible.

When using the FP-21T Precision and vacuum table, it is 0.05mm (50µm).

Other models without using the vacuum table, it is 0.2mm.

Fixing by Scotch tape is sufficient.

Additionally, we supply two kinds of vacuum table.

FR-4 board, Paper phenol, Teflon, Strontium titanate, alminium, and acril material

The milling speed or spindle rotation speeds can configure easily.

Additionally, the rough indication is written in the users’ manual.

FP-21T Precision is 0.05mm (50µm)

Other models are 0.1mm

From 150mm x 150mm (FP-21T Precision) to 400mm x 365mm (Auto Lab W)

DXF file and Gerber file.

(CR-5000, Altium Designer (Protel), PADS, OrCAD, WinPCB, Eagle, Microwave Office, AutoCAD, AutoDesk etc)

Bakelite board, FR-4 board, fiducial pin for double side milling, software CD-ROM, Installation Manual

Please ask us more detailed information because the specification varies depending on each mode. Rough standard specification is as follows:

    * regulating pressure ; more than 0.6Mpa

    * Outlet air volume; more than 60L/min

    * Diameter of the tube; 6mm (outer shape)

Compared with the house hold vacuum cleaner, it is very silent and has high dust-collection as well as high air cleaning HEPA filter.

A. House hold vacuum cleaners are utilizable. But there is a problem of the noise and some house hold type cannot operate at the same time as the prototyping machine. Additionally, some are not durable enough for long time usage.

    *  CAD designing the pattern of the circuit : EASY CAD

    * Personal computer (PC): OS Windows / Interface : USB port or RS232C port

    * Vacuum cleaner “Jetstream”

    * Air compressor, Ring setter (simplified model) base )for HP model / ATC model (Besides Auto Lab)

    * Tools (such as end mills) are required