Auto Lab 100 Specifications

Specifications

 

Model
Auto Lab 100
Minimum pattern width (mm) 0.1 (4 mil)
Minimum milling width (mm) 0.1 (4 mil)
Working area (X/Y/Z) (mm) 229 x 300 x 45 *6 (9.0″ x 11.8″ x 1.8″)
Table size (X/Y) (mm) 296 x 370 (11.6″ x 14.5″)
Control axis X, Y, Z
Control motor Stepper Motor
Resolution (µm) *3 0.156 (0.00614 mil)
Maximum Travel Speed (mm/sec.) *1 55 (2.17″)
Spindle speed min-1 (rpm) Spindle motor 5,000 – 100,000 HF Spindle
Drilling (mm) 0.2 – 3.175 (8 – 125 mil)
Maximum drilling cycle (cycles/min.) *2 55
Maximum thickness of processed material(mm) *4 10 (0.4″)
Tool change Automatic / 10
Milling method Absolute No
Incremental Yes
Compressed air (Mpa) 0.6
Power consumption 100 – 240 V, 50-60 Hz, 200VA
Machine dimensions W x D x H (mm) 435 x 575 x 430 (17.2″ x 23″ x 17″)
With cabinet: 500 x 580 x 450 (19.7″ x 23″ x 18″)
Machine weight (kg) Approx. 34 (76 lbs) With cabinet: Approx. 44 (99 lbs)
Interface One USB or one RS-232C port
Standard equipment Fiducial positioning camera 30x (USB)*5
10 Pieces Auto Tool Change
Software: EASY CAD, Conversion & CAM
Options and accessories Cabinet (requires assembly) Vacuum table Ring-setter / Precision ring-setter (manual)
Drilling ring
Microscope 100x
Software:
Vacuum cleaner
Starter kit  (Option) Connecting Cable (RS232C / USB)
Magnifying glass 10x
Extension hose for Vacuum cleaner
Tools: End mills
  Drill bit
  Router bit

*1 Optimum speed for cutting depends on tool, material of board and so on.
*2 This is a repeat count of drill’s up and down on the maximum stroke. Optimum strokes depends on the diameter of tool.
*3 The smallest traveling figures for ordering each 3 axes movement. They do not represent the accuracy of axis positioning.
*4 Value of the thickness of the material on the work table. This value does not show the maximum drilling stroke.
*5 Maximum useful magnification depends on the size of the screen.
*6 Z-axis stroke 50mm