Comfortline XL Level 3

PCB production with negative resist, galvanic through hole plating (PTH), green solder mask and blue components printing like Basisline Level 3, but optimized on through put for board size 300 x 400mm!
Basis_L3_links raw material cut to size
(Ne-Cut)
arrow down2
CNC-drilling and contour routing
(BUNGARD CCD/ATC)
arrow down2
brushcleaning
(RBM 300)
arrow down2
galvanic plating through hole
(COMPACTA 40 2CU)
arrow down2
brushcleaning
(RBM 300)
arrow down2
lamination of tenting resist
(RLM 419p #1)
arrow down2
vacuum exposure
(HELLAS)
arrow down2
spray developing
(SPLASH XL)
arrow down2
spray etching
stripping of tenting resist
(both SPLASH CENTER XL)
arrow down2
brushcleaning
(RBM 300)
arrow down2
chemical tinning
(SPLASH CENTER XL)
arrow down2
laminating of solder mask
(RLM 419p #2)
arrow down2
exposure of solder mask
(HELLAS)
arrow down2
spray developing
(SPLASH XL)
arrow down2
curing of solder mask
(HELLAS or hot air oven)
arrow down2
CNC-V-cut or contour routing
(Bungard CCD/ATC)
Comfort_L3_rechts

System features:

  • CCD/ATC for enhanced drilling, COMPACTA 40 2 CU doubles galvanic throughput, a second laminator RLM 419p avoids changing rolls between the steps!
  • maximum usable size: 300 x 400mm because of COMPACTA 40 2CU, SPLASH XL and SPLASH CENTER XL!
  • Fine-line technology in industrial quality with green solder mask and blue components printing!
  • (To make components printing repeat again from laminating but with RLM 419p #1 and blue tenting resist)
  • Modular upgradeable to multilayer, artwork production, waste water treatment or surface finishing set at any time!
  • Track resolution: better 150µm!
  • Leiterbahnenauflösung: besser als 150μm
  • Film production with laser printer or bubble jet or local film supplier.
  • Processing time: approx. 2 hours
  • maximum throughput: 3,0m² / 8h – approx. three times the volume of Basisline 3!